We like the TruFlo monitor. It has helped us on a number of occasions to track down some minor issues and we use it constantly while running our ICP.

Oil company - USA

(In reference to the D-Torch) The torch has been running like a Swiss watch ... The ceramic torch has shown no signs of deterioration, with 80 hrs/week running. The intensities on the 7300DV have also been elevated between 10-20%.

Contract laboratory - Australia

(In reference to the D-Torch) The Ceramic torch is quite excellent, mostly from a maintenance standpoint, it forms much less deposits on it and that which forms is usually very easy to clean ... I do think we'll continue buying ceramic torches mostly because they last much longer and are so much easier to keep clean.

Environmental laboratory - Sweden

Your flared end pump tubes are the best idea since Kim Wipes!.

Government food laboratory - USA

The D-Torch is performing very well. The ceramic outer has been in almost constant service 22 hours a day, 6 days a week since we purchased it and we have had no issues ... We are due to purchase a replacement ICP and will certainly be purchasing another D-Torch to go along with it.

Lubricating oils laboratory - Australia

I've been operating the IsoMist on the iCAP 6500 at 27 degrees centigrade ... the improvement in stability has been dramatic ... I am thrilled at the linearity with little shift throughout a complex standardization and sample run.

Precious metals laboratory - USA

The equipment works extraordinarily well. Keeping temperature at 5degC the noise drops to half as much as without the IsoMist. There is no problem at all with temperature stability and the signal is twice as much as the one obtained without the IsoMist.

University laboratory - Spain

The IsoMist was a treat because it took the place of the jacketed spray chamber, the heated bath, delivery tubes, and pump. It also eliminated my worries about leaks in my sample chamber. It is a small, neat package.

Oil company - USA

I would like to thank you for an excellent service! The goods were delivered in three(!) working days from the other side of the world. I'm still in a state of disbelief.

Environmental laboratory - Finland

Glass Expansion is the only supplier I would ever consider for purchasing consumables.

Wastewater treatment plant - USA

I love my MicroMist nebulizer. It's extremely stable and aspirates exactly 100uL/min. I checked it with a balance. My (other brand) aspirates about 300uL, even though it's supposed to be a 100, and it's not nearly as stable.

University laboratory - USA

Personally, if I was stranded on a desert island with a good ICP and could only choose one nebulizer I would go with the ceramic V-groove from Glass Expansion in Australia ... I don't think you will ever need to buy another nebulizer ... When I was introduced to the GE V-groove I was told it would pass gravel and it did while retaining its performance.

Electricity company - USA